.png)
PCC-IV Digital Loop Controller
The PCC-IV Digital Multiple Loop Controller, the upgrade for the PCC-III, is a boiler or multiple loop process controller. The PCC-IV has been designed to seamlessly replace the PCC-III in hardware and software designs, with upgraded technology and increased longevity.
- Dual Modbus Ethernet ports
- Color Touchscreen
- USB programming port
- Larger Blockware memory
- Modern dual core processor, large memory
- SD card for easy field firmware upgrades
- Retentive memory that never wears out (no battery! no EEPROM!)
- 100% compatible with any existing PCC-III to OIT, SCADA, or BAS communications links with NO Modbus changes required. PC4_Draw AutoConverts PCC-III into PCC-IV.
- Overview and Features
- Application
- Specifications
- Documents
Preferred Utilities considers not only the creation of new products, but the support and replacement of older products. With this in mind, we designed the PCC-IV Loop Controller to seamlessly replace the PCC-III when the hardware is too old to function. Look no further than Preferred for upgrades and the next generation of quality technology.
The PCC-IV is a complete control solution for individual boilers or multiple control loops. With upgraded technology and increased longevity, the PCC-IV is also a great replacement for the Siemens/Moore 352 and 353 models (out of production October 2017). With added features and a retentive memory that lasts 5x the lifespan of the Siemens controllers, the PCC-IV is prepared for any application.
Preferred also offers many other products that are fully capable replacements for any loop controller, like our BurnerMate Universal, PWC, and PLC based systems. While each type of controller has specific advantages/disadvantages, Preferred has the in-house control logic engineering, panel fabrication, and field service start-up to provide the best solution for your application.
Designed with the intent to seamlessly replace the PCC-III, the PCC-IV upgrade fulfills everything its predecessor did with additions. The most notable new PCC-IV features include:
- Dual Modbus Ethernet ports
- Color Touchscreen
- USB programming port
- Larger Blockware memory
- Modern dual core processor, large memory
- SD card for easy field firmware upgrades
- Retentive memory that never wears out (no battery! no EEPROM!)
- 100% compatible with any existing PCC-III to OIT, SCADA, or BAS communications links with NO Modbus changes required. PC4_Draw AutoConverts PCC-III into PCC-IV.
- Also available in a panel mounted DCS-IV configuration
The PCC-IV upgraded digital multiple loop controller is a powerful, expandable process controller that can be function block programmed for a variety of applications. Preferred offers the PCC-IV pre-configured for the following applications.
- Plant master controller
- Plant master controller with 3 boiler lead/lag control
- Boiler master (jackshaft control)
- Boiler master (jackshaft control plus oxygen trim)
- Boiler master (parallel positioning)
- Boiler master (parallel positioning plus oxygen trim)
- Boiler master (full metering combustion control)
- Boiler master (full metering with oxygen trim)
Custom configurations are also available.
Mechanical
- Case Size: Height: 7.38”; Width: 3.00”; Depth: 7.75”
- Enclosure Type: Flush panel mounted
- Front Panel Size: 8.00” H X 3.75” W
- Panel Cutout: 7.50” H X 3.13” W (+/-.062)
- Weight: 6 lbs. (excluding option boards)
Environmental
- Operating Temp: 32 to 122oF (0 to 50oC)
- Storage Temp: -20 to 150oF (-28 to 65oC)
- Humidity Limits: 15 to 95% (non-condensing)
- Front Panel: NEMA 13, IP65
Performance
- Accuracy: 0.025% Analog Inputs and Outputs, 70 F
- Resolution: 16-bit input / 16-bit output
- Execution Cycle: Ten per second
- Retentive Memory Life: 40-50 yrs., MRAM, no batteries, non-EEPROM
Operator Control Panel
- Display: Backlit TFT LCD display showing current display loop and variable
- Bar graphs: Process Variable, Setpoint, and Output displayed
- Touchscreen-based Pushbuttons: Display Select, Alarm acknowledge, Setpoint adjustment, 4 user-defined, configurable buttons
- Faceplate: Splash proof
- Alarm Annunciator: 10 Point, First out, Time/Date Stamped
- Status Indicators: 8 (6 Configurable)
- Real-time Clock Powered by super-cap, no batteries, keeps time for 8+ days after being powered down
Electrical
- Input Power Requirements: 24 Vdc (+/- 15%), 450mA, 10.5 VA (CPU board with faceplate, no option boards or field loads). See Section 2 to calculate additional 24Vdc load due to option boards and field device loads. 1.6A/24Vdc Input fuse, 1.1A max total load (recommended)
Input/output (Standard – no option cards)
- Analog Inputs: Quantity: 5, Type: 4-20 ma DC; 0-5 VDC
- Analog Outputs: Quantity: 2 Type: 4-20 ma DC, 800-ohm load
- Discrete Inputs: Quantity: 5 Type: 120 VAC opto-isolated
- Discrete Outputs: Quantity: 6 Type: (2) SPDT relay contact, 8A, 120V; ½ HP @ 120 VAC (4) Open Collector (sinking), 24 VDC, 200Ma
- I/O Expansion: See Table Above Communications
Network
- Protocol: Modbus (ASCII, RTU, or TCP/IP mode), Speed: 4800-115,200 baud, Type: RS-485 (optically isolated) or Ethernet
- Configuration: Type: Micro-USB connector
PCC-IV Controller Specification
PCC-IV Controller Brochure
PCC-IV Controller Manual
Preferred Draw Setup Program
DCS-IV Supplement
PCC-III to PCC-IV Conversions