PUMC
Linked In Facebook Twitter YouTube PUMC Blog Subscribe (203) 743-6741
PUMC Home : Product Divisions : Preferred Utilities : Product

Light Oil Pump And Motor Assemblies

Application | Features | Overview

The Model LO Light Oil Pump and Motor Assemblies are compact, direct drive units designed to meet the performance and reliability standards demanded in commercial, industrial and  institutional applications.

  •  
  • Gallery
  •  
Light Oil Pump And Motor Assembly - Model LO
+
Light Oil Pump And Motor Assembly - Model LO

  •  
  • Application
  •  

Typical applications include:

• Diesel Generators
• Fuel Transfer
• Oil Burners
• Fuel Oil Circulating Loops
• Day Tanks

The Model LO-100 & 200 Light Oil Pump and Motor Assemblies are compact, direct drive units designed to meet the performance and reliability standards demanded in commercial, industrial and institutional applications.
The pump & motor assemblies are for No. 2, No. 4, and diesel oils.

• 50 or 100 PSI Design Discharge Pressures
• From 20 to 2100 GPH Flow Rates
• Useful as a Replacement For Aged Assemblies

Back to top

  •  
  • Features
  •  
  • 50 Or 100 PSI Discharge Pressures
  • From 20 To 2100 GPH Flow Rates
  • Replacement For Aged Assemblies
Back to top

  •  
  • Overview
  •  

The Model LO Light Oil Pump and Motor Assemblies are compact, direct drive units designed to meet  the performance and reliability standards demanded in commercial, industrial and  institutional applications.  The pump & motor assemblies are for No. 2, No. 4, and diesel oils.

Construction: Built for maximum life, peak performance, and quiet operation, the pump and motor are precisely aligned on a one-piece, structural steel channel base.  The shafts are directly connected with a flexible coupling; rotating parts are protected by a rigid, closely  fitting, steel OSHA guard.  For external protection the set  is prime coated and finished with  an oil, water and solvent resistant, polyurethane enamel.  For easy access for inspection and service, components are thru-bolted to the base and accessible from the top of the set.

The pumps are bi-rotational, positive displacement, internal gear types with cast iron housings and Buna-N self-adjusting mechanical seals.  Being positive displacement pumps, the pumps require over-pressure relief valves for protection from an accidently closed or plugged discharge line.  Pumps are suitable for both continuous and intermittent duty.  Standard motors are base-mounted, have standard N.E.M.A. frames and are of totally enclosed fan cooled construction (TEFC).

Back to top