Electric Oil Heater

The Model L Electric Oil Heater is used for pre heating fuel oil as it is pumped through the piping system. It is usually installed on the discharge side of oil heaters that use steam or hot water as the heating medium to maintain oil temperatures during standby and cold starting conditions. It is also frequently installed in the oil return line to warm the lighter oils when it is necessary to avoid accumulations of paraffin wax in the piping system. For the latter application, a Preferred Model SB Suction Bell should also be installed in the tank to assure that warm oil will be drawn back into the suction line.

• The Thermostatically Controlled Electric Immersion Heating Element is Suitable for Pressures Up To 150 psi
• Adjustable Oil Temperature Thermostat range from 100°F to 220°F
• Furnished With Wattage Ratings Based on 208, 220/240, or 440/480 Volts
• Easy Element Removal for Cleaning or Replacement
• UL Approved

Three different watt densities:

1. Low Watt Density, Series E – have 12 watts per square inch of heating surface
2. Medium Watt Density, Series M – have 18 watts per square inch of heating surface
3. High Watt Density, Series S – have 24 watts per square inch of heating surface